phone unlocker v 2.11 - 2016

How To Unlock HTC Phones?

Model : All (including G1)


1 - Switch ON mobile with a not Allowed SIM Card,
2 - If phone ask, enter the PIN code of your SIM Card
3 - Now phone will ask you to enter the unlocking code !
Model : HTC SNAP
- Go to "Setting"
- Go to "Security"
- Select "Unlocking SIM" (at the bottom option)
- Enter Code you receive !
Model : SPV C500
1 - Switch ON mobile with a not Allowed SIM Card,
2 - The message "PUK2" appear,
3 - Enter the Unlock Code we send to you.
4 - Phone ASK for New Code PIN enter : 0000
5 - Confirm and compose : 0000**
6 - Click "Finish" and phone will show "Network is locked..."
7 - Enter the Unlock Code we send to you and click "Finish"
8 - Restart the Mobile who is Unlocked !
How To Unlock CDMA/GSM HTC Phones:
1. Insert not allowed SIM card.
2. Phone will tell you to insert an allowed SIM card and that the phone will switch back to CDMA mode.
3. Click OK.
4. Click green button to get to the main screen of the phone.
5. Click on settings.
6. Click on all settings.
7. In the personal tab click on security.
8. The phone will ask you to enter the unlock code. Enter it. Done.
HTC DROID Incredible 2 - ADR6350VW SIM Unlock Instructions
If customer has a Verizon Wireless SIM card in the Device:
Generate or buy SIM Unlock code
Go to: Settings -> Security -> Disable SIM card lock + Enter
Enter the SIM Unlock code when prompted.
If customer has non-Verizon Wireless SIM card in the Device:
- Generate or buy SIM Unlock code
- Have the customer power cycle the device
- Enter the SIM Unlock code when prompted (This will occur when device is powering up)

HOW To Unlock HP Phones?

1. Insert a SIM card (A SIM card that your phone is not currently accepting) in phone. 

2. Phone will ask for a code. Enter the code provided. 3. Place any SIM card in phone. Your phone is now unlocked. 
-------------------------------------------------------------------------------- Alternative Instructions (Use only if the above method did not work) 1. On the Today screen, tap Start Settings. 2. Tap the Phone Band icon. 3. Tap the Keyboard icon to open the virtual keyboard 4. Tap Shift and then Ctl key to enable the keys. 5. Tap the blank area below the band selection box to open the unlock tool. 6. Tap Shift and then Ctl to disable the keys. 7. Enter the 8-digit unlock code and tap OK when done. 8. Wait for the device to validate the unlock code (about five seconds).

How To Unlock ERICSSON Phones?

Model : All Ericsson 

1 - Switch ON your phone without SIM Card, 2 - Press 1 time the left arrow, 3 - Press 2 times the button * , 4 - Press 1 time the left arrow, 5 - The message "Personalize with MNC2" will appear, 6 - You can now enter the Unlock Code we send to you.

How To Unlock DORO Phones?

Insert non-accepted SIM card in phone, normally phone will ask for unlock code 

Or 

Remove any SIM card inside, without SIM card dial *#787464# and enter code when prompted. 

How to Unlock DELL Phones?

All Models:

1. Insert new SIM card.
2. Phone will ask for code.
3. Enter code we sent to your email and phone will unlock

How To Unlock CASION Phones?

Switch on your phone with a not allowed SIM Card, 
When the message "Enter Network Key" appears enter the code we sent to your email.

How To Unlock BLACKBERRY Phones?

Model : Blackberry 9530 Storm 

1. Insert any SIM card and turn ON your Blackberry. 
2. Turn OFF all the wireless connections. 
3. Go Back One Step by Pressing the Back Key. 
4. Go to Options 
5. Select SIM card. 
6. Press the Menu Key and select "Show Keyboard". 
7. Tilt the phone in Horizontal Position so that the Keyboard is displayed in the Landscape Mode. 
8. Type MEPD [you will not be able to see the typed info]. 
9. Then enter MEP2 
10. Now your Blackberry will ask you to enter network MEP code 
11. Enter the Unlock Code provided by us to your email and Press the Enter Key on the Screen. 
12. It will now say "Code Accepted'. 
13. Congratulations! Your phone is now unlocked. Now your phone can be used with any GSM Network with SIM Card. 
14. Go back to the Home Screen. Press the Menu Button and click on Manage Connections. 
15. Turn all the Connections ON.The phone will now reboot and ''Activation Required'' will no longer be displayed. 

Model : BlackBerry Bold 9000 & Torch 

1) Make sure your SIM card is NOT inserted into the device. 
2) Turn on the phone and click the “Manage Connections” icon. Choose the option “Turn off all connections.” The cellular radio will be turned off. 
3) Go back to the Home screen and click the “Options” icon and select “Advanced Options.” 
4) Scroll down and select “SIM Card” from the list. 
5) Press the following keys in order: (M) (E) (P) (E) 
6) A prompt will appear asking for the unlock code. Input the 16-digit code exactly. 
9) Reboot your device. 
10) Re-enable the cellular radio 

Model : Curve, 8300, 8310, 8320, 8800, 8820 

Must be done without a sim card inserted & wireless radios must be turned off. 

1. Go to settings. 
2. Go to options. 
3. Go to advanced options. 
4. Go to sim card. 
4. Hold the ALT Key while typing in MEPE or MEPD or MEPPE or MEPPD ( not case sensitive ) ( you will not see text appear on screen while typing ). 
5. It will say "Enter Network MEP Code, then you type in the unlock code, press in the trackball to confirm. 
6. Your phone is now unlocked. 

Model : BlackBery Storm (9500) 

1. Insert any sim card 
2. Turn off all of the wireless connections 
3. Go to Options 
4. Select Advanced Options 
5. Select SIM Card 
6. Hit menu select show keybord 
7. Enter mepd (you will not be able to see the typed info) 
8. Enter mep2 
9. Now it will say enter network mep code 

Model : BlackBerry 8700 

Go to the Menu -> Options -> Advanced Options -> Sim card press select, while holding the Shift key (bottom right corner CAPS), type mepd. You should now see the five locking categories listed, while holding the alt key, type mep2. Release the alt key. You are now prompted to enter the Network MEP code. Enter the code, enter Return/Enter, the device should then be unlocked. 

Model : BlackBerry 8800 

***** You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) ***** 

1 - Go to settings menu => and then Options 
2 - Select Advanced options => and then Sim card 
3 - Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD) 
4 - Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD) 
5 - You should be presented with a prompt "Enter Network MEP Code". Type in the 16 digit unlock code received from us and press in the track wheel / jog dial to confirm 
6 - Your phone is now unlocked 


Model : BlackBerry 8100 Pearl 

Question: My phone asks to enter a PIN number

Answer: For SIM cards with PIN ENBLED you will be required to enter a PIN. This is not the unlocking code that has just been provided. For information concerning the PIN, PIN2, PUK and PUK2 codes for a SIM card please read the manual that came with your phone. This is not a handset unlocking difficulty.

Question: My handset displays a different message then what is shown in this procedure when I insert a Non Vodafone Australia SIM card.

Answer: The most common message the phone will display is “Invalid SIM card”. Because each handset may have a different variation in software there is no common message. If your handset displays a different message it is recommended to move onto the next step. Note: Faulty SIM Cards - The handset may also display messages indicating the SIM you are using to unlock the handset is faulty, it could display “Insert SIM” “Bad Card”, “Card Error” or “Card Rejected”, confirm the SIM card is inserted correctly – Gold area downwards and the cut of the corner matches correctly. You will need a working Non Vodafone SIM card to unlock the handset, Vodafone can not assists with other networks faulty SIMs.

Question: I am outside of Australia and experiencing difficulties unlocking the phone that I purchased from a Vodafone Australia outlet

Answer: Clearly note this in the difficulties description. Vodafone Australia can only send a reply to the difficulty by email.

--------------------

Model : All BlackBerry

1 - Using the menu go to Settings Menu -> SIM card press select.

2 - While holding the SHIFT key, type mepd

3 - You should now see the five locking categories listed.

4 - While holding the SHIFT KEY, type mep2.

5 - Release the shift key.

6 - You are now prompted to enter the Network MEP code (it will also state how many attempts left)

7 - Enter the code

8 - Enter Return/Enter

9 - The device should then be unlocked

1 - Go to Options Menu => Advanced Options 
2 - In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd 
3 - You'll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2 
4 - Enter the unlock code. 

--------- 

Model : BlackBerry 8100 (Vodafone Australia) 

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE YOU ATTEMPT ANY UNLOCK PROCESS 

This procedure unlocks the handset from being network restricted from only using SIM cards from Vodafone Australia. In case of difficulties, please refer to the FAQ listed below 

1. Take note of the unlocking code shown above 

2. Insert a Non-Vodafone Australia working SIM card. 

3. Ensure the phone is charged and then switch the phone on. 

4. Optional Step: If the SIM card has a PIN, enter your PIN number. (See FAQ below) 

5. The phone will then display a message. The most common is “Invalid SIM card”. (Different message? See FAQ below) 

6. Select “Turn Wireless Off” 

7. Select “Settings” Menu , then go to Advanced Options > SIM Card 

8. Type alt-MEPT by holding the ALT-key and typing the letters MEPT with multitap i.e. type hold ALT, type {M}{ER}{OP}{OP}{TY} 

9. When prompted with “Enter Network MEP code (255 left)” on the screen, enter the 16-digit network unlock code provided for your phone, then press Enter. (Unlocking code is shown above) 

10. Reset the phone by pulling the battery 

11. Switch the phone on and the handset will be unlocked automatically. This will be confirmed if you can make and receive calls with the Non-Vodafone Australia SIM card. (You will need reception and phone credit with the different network provider) 

Please Note: 

If the unlocking code is entered incorrectly the next attempt to unlock the device will be delayed for 10 seconds increments. The number of unlocking attempts is limited to 255 tries only. When 255 attempts is reached the phone will be permanently blocked.

To unblock the phone, it must be taken to a RIM service center. No outgoing calls including emergency call is possible when the phone is blocked. 

FAQ:

How To Unlock BENQ Phones?

Model : All Benq 

1 - Switch ON your phone with a not allowed SIM Card, 
2 - Enter the Unlock Code we send to your email.

How To Unlock APPLE iPhones?

iPhone unlock instructions: 

Actually there is no need to Enter an "Unlock Code" on Apple iPhone, all the process is done via iTunes once you receive from us the confirmation email of Unlock. The most important part is in case you "Jailbreak" your iPhone in past to unlock it, that you remove all application related to that. Once your iPhone is clean from any Jailbreak Application please follow these steps : 

1 - Install the last version of iTunes 
2 - Make sure your iPhone is updated with the lastest version of Firmware (iOS) 
3 - Swiftch on your iPhone with an Not Accepted SIM Card 
4 - Connect your iPhone to your computer using the Original USB Cable 
5 - Launch iTunes & wait until iTunes detect your iPhone 
6 - Now disconnect your iPhone and reconnect it after 10 seconds. 
7 - Your iPhone is now Unlocked. 

PS: in Case your iPhone is not unlocked, just do "Restore" ! 

iOS7 Update: How does Activation Lock work? 

When you enable Find My iPhone on your iPhone, iPad, or iPod touch running iOS 7, the Apple ID and password you use for iCloud is securely stored on Apple’s activation servers and linked to your device. From that point on, your password will be required before anyone can turn off Find My iPhone on your device, erase your device, or reactivate and use your device. 

Activation Lock is enabled automatically when you turn on Find My iPhone in iOS 7, or when you upgrade to iOS 7 from a previous version of iOS that has Find My iPhone already turned on. 

To turn on Find My iPhone on your device: 

Go to Settings. 
Tap iCloud. 
Sign in with your Apple ID, if necessary. 
Turn on Find My iPhone. 
Prior to unlocking a phone, make sure the previous owner of the unit has turned off findmyphone and erased all contents & settings. 

Request UnAvailable***